Clean Your Home’s Deck With Pressure Washers

One of the main tasks of every homeowner is to pressure wash a deck, if you are doing for the first time it can cause you more harm than good. Homeowners always expect that more pressure is better, which often leaves deep and unsightly damage on each pass of the wand. If homeowner tries to pressure wash the deck by itself then will cause more damage to the wood as we generally end up increasing the pressure of the washer.

When it comes to the days of pressure washing, a good pressure washer in Delray Beach could quickly become one of your most valuable tools, which will help you tackle a range of different cleaning task in a record time. A professional pressure washer will make your old wooden deck into a new one.

How to pressure wash deck properly without damaging –

The main goal of pressure washing is to clean away the dirt and debris away and to leave no visible traces in the wood or leave raised wood fibers. The pressure wash knocks the dirt loose and the flow rinses all the debris away.

Whenever you decide to have an appropriate safety gear, many homeowners underestimate the force and injury a pressure washer can inflict on a human body. You should always be sure to have rigid rubber boots and water resistance work pants as well as eye protection.

There are many pressure washer accessories that can make your pressure washing job much easier.  So let’s explore few points what Pressure Washer of Delray Beach go through –

·The safety Measures – The safety measures are must, as even though they are incredibly practical and efficient, the pressure washers can actually cause some serious injuries. During pressure washing, you should always wear long pants, sturdy footwear and the goggles whenever you are using the pressure washer, especially for your deck. You should always put on the proper clothes and avoid the loose clothes as it can pull you into the spray.

·The Site Preparation – If you are going to clean your deck, first you have to remove all the existing items from it.  Remove all the fragile items as you are certainly going to cause a lot of damages by chance you hit them while cleaning your deck. After cleaning, take a vroom and sweep away all the leaves and another kind of loose debris.

·Preparing your deck for clean up – Okay so now your deck is ready for the cleanup process, the first step you have to follow is to fill the unit’s soap dispenser with your preferred cleanser. Install the nozzle at the tip of the washer, power up the machine and gently distribute the dilution of soap and water all over the deck. You must remember that thorough cleaning will let your old deck shine like a new one.

·Clean the Corners -  I am sure you don’t want to leave any of your deck corners to fill with the stain. So you can just a stiff scrub brush and work the cleaner with it into hard to reach areas and tight corners, as well as the spaces between the railings. Don’t let the detergent to dry out to avoid streaking.

·Pressure Wash Your deck – You can choose your widest spray nozzle and begin the pressure washing process. Use the wide sweeping motion, as they easily remove the grain of the wood. The best distance from the deck to the nozzle is two feet. Keep the cleaning continue until the desired area is completely clean. At last, you can simply just turn off the washer and drain the water line by pulling the trigger which will release the residual pressure.

REMEMBER – Okay so, once you finished the pressure washing process you can leave the deck to dry completely in order to inspect for any stubborn areas. After your deck is all dried up it is always easier to spot the damaged areas. Always carefully read the label on the protective coating or the stains.